Sunday, June 19, 2011

Sailboat Update




Ok, guest post from Matt.



To your left is pictured a brand new Boom Kicker (tm) for our small sailboat (Hunter 146), aka "Piglet". It is a set of flexible rods making a triangle between the boom and the mast. The boom kicker holds the boom up when the sail is not holding it up. This keeps it from falling down on your head when you drop the sail. Outside of the boom kicker, you will find a set of ropes and pullies constituting a boom vang. The boom vang holds the boom down when the sail is pulling it up. Between the boom kicker and the boom vang, we have total control over the level of the boom (and the shape of the sail). And that is a good thing.



Before we had the boom kicker (a Christmas present from Jen's parents), the boom was held up by something called a topping lift. The topping lift is a rope that goes from the top of the mast to the end of the boom, making a huge triangle that is roughly the size of the main sail. This setup generally works OK, but sometimes the topping lift interferes with getting the proper sail shape. Generally speaking, you want the boom to hang from the sail, not from the topping lift. But to achieve this, you have to loosen the topping lift when you hoist the sail. The only problem with doing that is when you drop the sail. A loose topping lift means a boom falling on your head when you drop the sail. Not ideal.



To your right, you will notice the complete and total absence of a topping lift. So, you can ask yourself: "What is holding the boom up?" And you can answer that question, now knowing that it is the boom kicker. :-)




Ok, the boom kicker is not the only upgrade that we have recently made to Piglet. We have also added what is undoubtedly the strongest, beefiest, motor mount to ever grace the hull of a Hunter 146.


When we bought Piglet, the boat did not come with a motor. So we used what was available for free, namely a 1980s-era 2 hp "Cruise and Carry" motor that came as an extra on a 1970s-era sailboat that I learned to sail on in the 1990s. It was such an extra that we immediately sent it to the shed, never (or seldom) to ever be used thereafter. After ten or so years of sitting in the shed at the beach, and five or so years of sitting in another shed at the farm, we decided to use it as the Piglet motor. Amazingly, it always worked and never let us down on a large number of trips. Although it was rusty beyond belief, and sounded like an angry chainsaw, it worked.



But there are times that you don't want to gamble with your source of propulsion. Se we got a shiny new motor. We got a 3.5 hp Mercury four-stroke motor that didn't smoke, didn't display every possible shade of rust, and didn't sound like an angry chainsaw. It was great. The only problem is that it was about twice as heavy as the old motor, and started bending the metal part of the motor mount that came with the boat.


Enter the Boss motor mount. After some extended consideration and research, I decided that the answer was to have a much beefier, custom motor mount made. Whatever the cost involved (the mount is made out of 316 stainless steel), I would have something adequate fabricated from scratch. This was to avoid dropping our new shiny motor off the back of the boat and into the deep.


Over the internet, I found a guy who seemed to be able to do the fabrication, and went to go see him. In the hood. The worst possible hood in south Atlanta. Nevertheless, the guy had a decent shop (plus bars in the windows, etc) and suggested simply straightening out the old mount and welding some additional stainless steel bars on the side. That is what we did, and it worked great. The funny part is that he really didn't seem that interested in doing the project, and kept asking me if there wasn't some other way to get by with the old one. Weird.


Here is the Boss motor mount. And check out the extra thing angle bars welded on each side. You can compare the metal mount for the rudder to see the difference. The rudder has a single, skinny angle bar in the center. That is exactly what the motor mount had as well. Now it has like five times that much steel!!! I believe that this is the best Hunter 146 that money can buy.


Note the shiny new motor as well.

While we are at it, also check out the non-bent jib furler and metal fitting on the bow. Yeah, you guessed it, they are in place of the bent ones that the boat came with. ;-) The end.












Sunday

We got the boat in the water today and did some sailing this afternoon. The wind was quite strong, so we may need to reef the sail tomorrow. We also got our new boom kicker attached to the mast, which helps hold the boom up (pictures to come). 

When we finished sailing, we enjoyed some margaritas while sitting on the dock. What a hard life.  ;) 

At the beach

We arrived at the beach on Friday night late after work. Yesterday we went grocery shopping and woke up the little sailboat from its winter hibernation. It held up pretty well; some of the tarp was torn, and it got dirty, but a through scrubbing did a pretty good job in cleaning it up. We also installed our new, mega-strength motor mount, but we had to let the sealant dry. Today, we'll put the boat in the water!  It's hot and windy here.

Sunday, June 12, 2011

Wind!

We went to the lake today and actually had wind to sail! Who would've thought? After several weeks without it, there was a good strong wind today and we spent a few hours sailing.

Later in the day, we anchored so we could cool off and jump in the water. Unfortunately, a storm snuck up behind us while we were anchored and we had to decide whether we had time to make it back to the marina or if we should stay put. The wind had really kicked up by that point. We got the sail put away and closed up the cabin, but only got a little bit of rain -- the storm went across the lake and just missed us to the south. By the time we got back to the marina, it was very wet there, but we lucked out and missed most of the storm.

In the picture I'm posing with some inflatable friends that I bought at the dollar store in case we ever find ourselves in a situation where we need some fun decorations. :) The monkey has a hole in him though, and doesn't stay inflated for long. :( (I guess that's what you get for $1...)

Tuesday, June 7, 2011

Official Macon Tri Pics

The "official" pictures from the Macon triathlon are online -- you can see them here. I don't think that they are quite as good as the ones from the Iron Girl.

Sunday, June 5, 2011

Stanchion repair

We went to the lake today with the goal of replacing two of the stanchions on the right side of the boat. The stanchions were bent when we got the boat -- we think it must have hit the dock at some point -- and Matt ordered new ones a few weeks ago, but we just hadn't had a chance to put them on yet. It was an involved process, because we had to remove the life lines, take the old ones off, scrap off the old sealant, put new sealant on, install the new ones, and then put the lifelines back on. You can see why we've been putting it off.

Here's a fun picture of the boat with the old stanchions removed --

And here's a picture with the new ones on --We think we had some leaking when we first got the boat, so we're also helping that this -- and the sealant we put on it -- fixes the problem.

Also, just for fun, here's a picture of the wind sock that I bought at the dollar store for the boat. It's tropical-themed (complete with palm tree, flamingo, seashells, sand castle, and hula dancer), so it fits with our boat name, and it might help us determine whether we actually have wind or not. :)


Saturday, June 4, 2011

Macon Triathlon

Today I did the Rock 'N Rollman Sprint Triathlon in Macon. It was very close to my parents' house, so it was super-convenient to get to. And it was a hot day for a race.

As a part of the day's events, they had all sorts of races -- a half Ironman (1.2 mile swim, 56 mile bike, and a 13.1 mile run), the sprint triathlon (750 meter swim - or about a half mile, 15 mile bike, 3.1 mile run), a long-course duathon (run/bike/run), an aquabike (swim/bike), and a 10k run. The people at this race seemed intense -- I got the feeling this wasn't your average race with lots of first-timers.

I finished the race in 1:40.23. This put me at #37 out of 79 women overall, or #6 out of 11 in my age group. Results are posted here.

By event:
-- I finished the swim (750 meters) in 15:46. Of all of the women, I was #17 out of the water.
-- I finished the bike (15 miles) in 52:17. Of all women, I was #44 on the bike.
-- I finished the run (3.1 miles) in 29:24. This put me at #53 in the run.

I would have liked to have done better, but oh well. I did the best I could. The group doing this race was fairly small (around 200 for the sprint), but they were good.

Just a few other observations --

It's awfully different swimming in a lake compared to the pool, when you can't see where you are going! I really need to work on swimming in open water, so that I don't end up off of the course. Someone kicked my goggles towards the end too, and I was just glad they stayed on my head for the remainder of the swim!

The bike course was a lot more hilly than I expected. I didn't realize Macon was that hilly.

I should have done better on the run. It was just so hot -- not shaded -- and the whole first half of the run was uphill. Yes, the second half was mostly downhill, but that was too much. It was rough.

My dad took a lot of pictures, which you can see here.