To your left is pictured a brand new Boom Kicker (tm) for our small sailboat (Hunter 146), aka "Piglet". It is a set of flexible rods making a triangle between the boom and the mast. The boom kicker holds the boom up when the sail is not holding it up. This keeps it from falling down on your head when you drop the sail. Outside of the boom kicker, you will find a set of ropes and pullies constituting a boom vang. The boom vang holds the boom down when the sail is pulling it up. Between the boom kicker and the boom vang, we have total control over the level of the boom (and the shape of the sail). And that is a good thing.
Before we had the boom kicker (a Christmas present from Jen's parents), the boom was held up by something called a topping lift. The topping lift is a rope that goes from the top of the mast to the end of the boom, making a huge triangle that is roughly the size of the main sail. This setup generally works OK, but sometimes the topping lift interferes with getting the proper sail shape. Generally speaking, you want the boom to hang from the sail, not from the topping lift. But to achieve this, you have to loosen the topping lift when you hoist the sail. The only problem with doing that is when you drop the sail. A loose topping lift means a boom falling on your head when you drop the sail. Not ideal.
To your right, you will notice the complete and total absence of a topping lift. So, you can ask yourself: "What is holding the boom up?" And you can answer that question, now knowing that it is the boom kicker. :-)
Ok, the boom kicker is not the only upgrade that we have recently made to Piglet. We have also added what is undoubtedly the strongest, beefiest, motor mount to ever grace the hull of a Hunter 146.
When we bought Piglet, the boat did not come with a motor. So we used what was available for free, namely a 1980s-era 2 hp "Cruise and Carry" motor that came as an extra on a 1970s-era sailboat that I learned to sail on in the 1990s. It was such an extra that we immediately sent it to the shed, never (or seldom) to ever be used thereafter. After ten or so years of sitting in the shed at the beach, and five or so years of sitting in another shed at the farm, we decided to use it as the Piglet motor. Amazingly, it always worked and never let us down on a large number of trips. Although it was rusty beyond belief, and sounded like an angry chainsaw, it worked.
But there are times that you don't want to gamble with your source of propulsion. Se we got a shiny new motor. We got a 3.5 hp Mercury four-stroke motor that didn't smoke, didn't display every possible shade of rust, and didn't sound like an angry chainsaw. It was great. The only problem is that it was about twice as heavy as the old motor, and started bending the metal part of the motor mount that came with the boat.
Enter the Boss motor mount. After some extended consideration and research, I decided that the answer was to have a much beefier, custom motor mount made. Whatever the cost involved (the mount is made out of 316 stainless steel), I would have something adequate fabricated from scratch. This was to avoid dropping our new shiny motor off the back of the boat and into the deep.
Over the internet, I found a guy who seemed to be able to do the fabrication, and went to go see him. In the hood. The worst possible hood in south Atlanta. Neverthe
less, the guy had a decent shop (plus bars in the windows, etc) and suggested simply straightening out the old mount and welding some additional stainless steel bars on the side. That is what we did, and it worked great. The funny part is that he really didn't seem that interested in doing the project, and kept asking me if there wasn't some other way to get by with the old one. Weird.
Here is the Boss motor mount. And check out the extra thing angle bars welded on each side. You can compare the metal mount for the rudder to see the difference. The rudder has a single, skinny angle bar in the center. That is exactly what the motor mount had as well. Now it has like five times that much steel!!! I believe that this is the best Hunter 146 that money can buy.
Note the shiny new motor as well.
While we are at it, also check out the non-bent jib furler and metal fitting on the bow. Yeah, you guessed it, they are in place of the bent ones that the boat came with. ;-) The end.
While we are at it, also check out the non-bent jib furler and metal fitting on the bow. Yeah, you guessed it, they are in place of the bent ones that the boat came with. ;-) The end.
I wouldn't say that the old motor NEVER let us down, but it got the job done for the most part. ;)
ReplyDeleteNever stranded, at least.
ReplyDelete