
First, we took all of the tiles and grout off of the table. A lot of them were pretty loose, so it wasn't hard to get the process started.
For some, we had to use a hammer and screwdriver to pry them up.
With all of the little pieces, it kind of looked like a disaster had gone over the top of the table.
Then, we cleaned off the top of the table, and ended up with a nice, still good looking piece of wood underneath.
We were lucky!
On Sunday evening, we got the tiles fastened to the board, but had to give it 24 hours to dry. So the next night after work and class, we moved on to the grout.
It was pretty scary to have our table covered in black and then to have to try to get all of that up -- especially because the stones are at varying heights. For a while, I was afraid we were going to end up with an all-black table.
But, with A LOT of elbow grease, we got the excess grout off of the table. We let this dry for a few days, wiped it off again, and then applied a sealant so that it hopefully stays water-tight when we put it back outside!
Here's what the final product looks like --
This project has taught me that if we ever want to tile a room, it just might be worth paying someone to do it for us. This little project (2 feet by 4 feet) was hard enough!
Because the tiles are at different heights, we also thought it would be a good idea to get placemats to set our food/drinks/etc. on (and also so our dishes don't scratch the table). So, I bought some of those (with starfish on them) at Bed Bath and Beyond today too.

No comments:
Post a Comment